The Shore Ramp PWC-50 provides convenient and easy storage of your personal watercraft on shore. Works with Sea Doo, Waverunner, and Jet Ski PWCs. Large, low-friction rollers make it easy to winch your watercraft up and completely out of the water. When your watercraft is stored on land, you can put the cover on and off and access it for fueling, cleaning, or other maintenance without getting wet. When it is time to go boating again, your watercraft can be launched in seconds, getting you on the water without delay.
14'-8" long - handles larger 3-person watercraft with room to spare. The sturdy frame is constructed entirely of high-strength aluminum and is rated for up to 1200lbs. All the fasteners are stainless steel, so the Shore Ramp PWC-50 will last for many years without corrosion.
NEW - Select the optional Electric Winch Kit upgrade for even more convenience.
Weighing only 85 lbs, the Shore Ramp PWC-50 is easy to position on your shore. For those in more northerly locations where lake equipment must be removed for the winter, the PWC-50 can be conveniently pulled out by one person.
IMPORTANT: The PWC-50 is NOT compatible with some specific 2021 Sea-Doo models with the deep-V ST-3 hull: 2021 RXT-X 300, 2021 Wake-Pro, and 2021 GTX-Limited 300.
Compared to a traditional boat lift, the PWC-50 is quicker and easier to use and does not require adding to your dock.
Other roller ramps with ladder-style frames have sharp-edged cross-beams and exterior rails that risk scratching your watercraft. The Shore Ramp PWC-50 with its large rollers mounted outboard on cantilevered round axles eliminates the chance of scratching.......SCROLL DOWN FOR LENGTH AND SPECS!
The Shore Ramp PWC-50 ships as a kit with all parts and fasteners that can be assembled in about 60 minutes.
Assembled Dimensions & Weight: 36” wide, 176” long, 28”
high, 85 lbs.
Maximum Watercraft Weight: 1200 lbs
Maximum Recommended Watercraft Length: 144”
Maximum Recommended Watercraft Width: 54”
Roller Inside Edge Width: 12.0“
Keel Clearance: 4.0”
Roller Outer Edge Width: 16”
Rollers: 18 Polyolefin, 5” diameter, 2” wide.
Frame: 6061-T6 and 6063-T52 Aluminum. Stainless 18-8 fasteners.
Winch: Galvanized steel. 800-1200 lbs pull rating.
Shipping Dimensions & Weight: 10” wide, 7” high, 94” long, 105 lbs.
Tools Required for Assembly: 9/16” box wrench, 9/16” socket wrench, medium pliers.
Ships in 2-4 days via UPS.
Kit packaged in U.S.A.
Main parts fabricated in U.S.A.
(wheels, winch imported).